Saturday, January 11, 2014

The Porch Roof!

Today the weather was quite warm compared to the last month or so...in the 40's! Wahoo! Decided to take on the porch today.  I had an idea of how I wanted it to go, so I went out and measured, then started cutting.  Put the framing together, but then the dilemma...how to get it up to where I wanted to attach it to the house and hold it there while I attached it.  So I put on the support posts then with my Incredible Hulk- like strength hoisted the whole thing up onto the porch. The support posts did their job and I was able to adjust the part that would be attached to the house and get one screw in. Whew!  Put a few more screws in and came in the house for dinner.  After dinner I put Mom to bed and went back out to do a bit more work. I took a light with me and I have to admit it was really nice to work out there with a light tonight. It stayed realtively warm until I came in at about 11.  But it is supposed to snow again tomorrow...big cold front coming through. So after dinner I put some sheathing on the porch roof. I'm determined to not buy another piece of plywood so I'm piecing together the porch roof.  One side is 1/2 inch plywood and the other side is 3/4 inch plywood. But I think I'm the only one who will know (except all of you who read this), and it won't be noticeable once the drip edge is on. So I was really happy with what got finished tonight. I still need to finish the sheathing because I didn't want to run the saw after 10pm.  I cut what I could and put it on, then covered it with roof paper, hoping that the wind will not blow it all away.  Since I finished so late I obviously didn't get any good pics.  I'll add some to this post tomorrow.  Yipee!! Now I can finish the siding on the porch side too. VERY excited about that.  Making progress and quite pleased with it.

Porch in the dark...

Porch in the light...

Looking out from inside the house

Another view

Friday, January 10, 2014

Port side eave trim!

I was conflicted today about what to work on...outside or inside. The weather was quite warm in comparison to how it has been lately. Tomorrow is supposed to be even warmer, maybe even in the 40's. So outside won. I got the eave trim on the port side as well as the drip edge. It took me much longer than I thought it would, but then what hasn't taken me longer than I thought it would? I took a picture, but it didn't turn out very well because it was getting dark again. Putting up stuff like this by myself has been an interesting challenge, but I have adopted a new motto. "The best way to finish something is to start." So I just start things and they miraculously get finished! I also have learned to have more realistic expectations. I used to think I could finish three or four things in a day. Now if I finish the top one on the list I get way excited! So the debate begins...with the weather so nice tomorrow which outside thing to begin? Starboard side eave trim and drip edge? Gable end siding? Porch roof? I think the two contenders are gable end siding or porch roof.  Have to say I'm leaning toward porch roof. We'll see what happens in the morning! Yipee!

Monday, January 6, 2014

Lower roof vents

I got the screen attached to all the vent pieces and here is the before and after.  Got all the pieces attached except for one which I had to recut and repaint the cut end. That is actually finished, but I haven't been back out to put it in.  I also realized that I need to finish the siding on the gable ends before finishing up the roof. Today it is snowing again and it is supposed to snow the next couple of days so guess I'll have to bundle up a bit.  I've got plenty of projects I could do on the inside as well. On the list...easy gable end, porch roof, porch side gable end.  

Sunday, January 5, 2014

More little things...

All the hurricane clips are moved, and the eve end of the roof sheathing has now been secured (I forgot that I hadn't done that).  Now I've moved on to making sure the roof has enough ventilation. I've done quite a bit of research and looked at a ton of videos, manufacturers information, blah, blah, blah.  Anyway, I hope what I decided to do will be enough ventilation for my roof.  I've put in rafter vents between the rafters and what I'm working on today is the lower air intake side. Many houses have soffits, but mine won't so I'm cutting a big notch in the pieces of siding that will fill the space between the header and the roof sheathing.  Getting all the siding pieces to match up has been quite frustrating.  You know that measure twice cut once thing? Well, it works but only if you cut the correct side.  Yep, I cut the pieces for the starboard side, had them all matched up between each rafter and then I cut the vent on the bottom instead of the top. Technically I could just turn them around and they would still fit, but the siding wouldn't match. (And yes, I AM being that picky about it, because I know that in the future it would bother me, even though no one else in the universe would ever even notice.)  I will even admit that I cried when I realized what I had done, because I had just spent hours matching, marking and cutting.  So I was twice as careful when I did the port side and did that side correctly the first time.  Ran out of daylight before finishing the second round of starboard cutting, so that is on the list for today, but I figured I would do a little painting this morning inside while waiting for the outside temp to go up a little bit. Here is what my kitchen currently looks like.

Next up...attaching some screen material to the back of these pieces to keep the bugs/birds/squirrels/anteaters/kangaroos etc out of my roof. :)

Sunday, December 29, 2013

Little things...

After the lofts were finished, I put all the lumber and the eave trim and ridge cap in the loft and have started laying out the bathroom and kitchen.  I put in the electrical boxes yesterday and started drilling the holes for the wiring.  Today I finished the holes for the electrical and started fixing the hurricane clips that needed to be moved down.  When I originally put them up I didn't measure where the bottom of the clips ended up, so when I tried to attach the bottom half of the clip to the wall I ended up putting screws through the siding only.  That wouldn't work.  So I had to move the clips down about two inches to make sure I fastened them to the header 2x4.  I've been putting off moving the clips because the snow around the house is crusty and hard and not a very stable platform for the ladder.  But I decided to bite the bullet and see if I could accomplish the task safely.  I got one side all fixed. Tomorrow I'll finish the other side and maybe run some wiring.  I think I'm going to hire an electrician to hook up the breaker box and consult about the solar stuff.  No pics today, not much to see.

Wednesday, December 18, 2013

Lofts are in!

  A major event has taken place...I GRADUATED!!! And although I still wake up thinking I need to work on my paper, I can very easily (now) convince myself to go back to sleep for a little while.  It has also been very cold, I know I'm a wimp, but it has actually started to warm up a little into the 20's.  I also lost my warm gloves.  I suspect I dropped them somewhere after walking Nellie or something, so I don't expect to find them.  Guess it is time to get some new ones...sounds like a stocking stuffer coming on.

So after another long break from working on Ticklebelly Bungalow I finally made a path in the snow and  got back out there. (Supposed to snow again tomorrow.) I went last week and got one more piece of plywood I needed and had them cut it to size at the store.  That also meant that it would fit in the Jeep.  Got it home and it was 1/4 inch too wide.  Today I finally got out the saw and cut it down that 1/4 inch so it would fit.  Also needed to cut the length of the other piece to fit the loft and this is what I finally have!  A loft!  The plywood is secured and it is ready to go!

This is my current view when lying down in the loft.  Hehehe



I also have been working on the rafter vents and have the first row up.  Need to cut the remainder to size and that will be an easy 20 minute job to get the rest in.  On the other hand, usually that 20 minutes turns into 2 hours because of something I figured out differently or a new idea, but this one is pretty straight forward.

Up next...putting all the trim in the loft for storage and marking the layout of the walls, kitchen cabinets, and closet on the floor below.  Then I can start putting in the electrical boxes where they are going to go, and pulling the wiring.  I suppose I need to decide where my breaker box will be. :)

Monday, December 2, 2013

Big snow is coming! Good thing I finished the roof today!

Got started early today because I was keeping an eye on the weather.  It was in the 50's today, but tomorrow it is supposed to snow, and the rest of the week the temps aren't even going to break freezing!  Crazy weather! but the skiing is going to be good this year.

Today: first I took off the roof sheathing I put up before because it was crooked.  I snapped some chalk lines to keep everything on the straight and narrow. I put up the lower course of sheathing on both sides so I could work from inside the house.  But I was faced with a small dilemma.  The plywood sheathing that I needed in order to finish the lower course was being used as a platform between the lofts. Ah, then a revelation...I had a piece left over from the subfloor that I could use.  So now instead of a platform I had a footbridge, but it was enough that I could finish the roof without moving the ladder a bazillion times and going up and down, up and down.  After the first row was secured, I decided to put the first row of roof paper on, again so I could work from inside the house.  Can you tell I'm trying to minimize my time on top of the roof?  I also need to get a taller ladder in order to get up there.

A funny experience...I was putting on one of the bigger pieces (read that heavy) of sheathing on the bottom row and holding it in place with my left hand. It was getting really heavy and I knew if I didn't get it attached pretty quick I was going to drop it.  So I grabbed it with my right hand to rest my left for a minute.  My left thumb wouldn't straighten, so I very quickly attached the plywood and had to actually straighten my left thumb with my right hand.  Never had that happen before and it was strange because I didn't get a cramp or anything...very weird.  Anyway, I was glad that I didn't have to hold up anymore plywood because that was the last piece on the bottom.

So after the bottom row and the roof paper, I started the second row, about ran out of screws and had to ration the last few.  When I got to the second side I actually didn't completely attach each piece because I couldn't reach very far.  So I still need to add some screws on the far side of each piece, but I was really pleased with what I got done.  

Since the snow is coming I put the tarp back on and only had to use one.  That is a relief!  So much easier to secure one rather than two.  So excited for the progress!!!

So here are some pictures of the progress today.  Didn't get a pic of where we finished because I finished after dark again.  The eve trim is next so I can then put on the drip edge and then the metal roof.  Wahooo!  

Here's where we started this morning....

Bottom row of sheathing finished on both sides....

Top row started...


Roof paper on and top row almost finished.